Lasermaschine

engrave stones

Engraving stones with the Mr Beam laser cutter. Let us show you how to create amazing laser engravings with stone and ceramics.

Engrave stones with precision

"It's not set in stone" was yesterday. With the Mr Beam laser cutters you can engrave great effects and high-resolution graphics on stone and ceramics. Minerals have been around since the beginning of time. Providing them with detailed and finely worked graphics is the oldest craft of mankind. With the Mr Beam laser cutters you can take this ancient art to a whole new level on stones. Let your creativity run free and transfer the result perfectly to the ancient material. This guarantees curiosity and attention.

Let your creativity flow

The old material and the high-resolution graphics create a perfect contrast. Even the best sculptors in history could not engrave such detailed images and writings in the stone as you can do today with your Mr Beam. Exclusivity and value come with this combination automatically.

Mr Beam Lasercutter
Stein gravieren

Stone engraving ideas

This is just a small selection of the many possibilities that you can implement with Mr Beam and natural stone. Use your laser cutter to engrave stones in the following applications:

  • Interesting giveaways
  • personalized slate breakfast boards
  • bell and door signs
  • game boards
  • souvenir
  • name tags
  • particularly exclusive business cards

Laser stones immediately with the Mr Beam

The engraving machine for inscribing the stones is delivered ready for use. You don't have to install anything. The entire control of the Mr Beam is browser-based. For stone engraving you only have to choose a few parameters. To create designs, you can use the built-in tools or load an externally created graphic. It is very easy to use and you can start engraving stones immediately.

Effortlessly save time
Just laser at home
Usable out of the box

Safe stone engraving without risk

The Mr Beam is designed for safe operation . The device is equipped with a safety cover. This means that the class 1 laser cutter cannot cause any damage, even in reflection. The orange-colored, specially made safety glass reliably scatters the laser light . A complete declaration of conformity with CE marking is available for the machine.

Mr Beam Lasercutter
Naturstein gravieren

Engrave natural stones

A great introduction to stone engraving is the design of hand flatterers. Just go to the nearest creek and pick out some nice, round pebbles. Writing on such stones is perfect for a personal gift. You can engrave the following natural stones with the Mr Beam:

  • slate
  • agate
  • Dark marble
  • pebble

Also suitable for artificial stone and ceramics

With the Mr Beam you can also easily engrave artificial stone such as concrete or clinker . But make sure that the laser engraving creates a rather light contour. For optimal legibility, the source material should therefore be as dark as possible. You can also laser tiles if they are not too shiny. The same applies to marble polished to a high gloss. The more reflective a surface is, the less suitable it is for laser engraving.

Tip for engraving stones: You can roughen the area to be engraved with some sandpaper beforehand. This takes away the reflectivity of the engraving area and achieves a better result.

Downloads für den Mr Beam

Laser engraving with the Mr Beam - more than just marking stones

With the Mr Beam you apply high-resolution and detailed design elements to a variety of materials. Start writing stones - but discover what else your laser cutter can do. You can engrave any material that is not reflective or transparent. We would only advise against engraving plastics containing chlorine. The fumes from these materials are hazardous to health.

Be part of our mission

We keep in close contact with our users. So show us your results and publish your engravings with #madewithmrbeam via Instagram, Pinterest or Facebook. Become part of our Facebook group and receive technical support and lots of application tips from other users. The community will help you get the most out of your Mr Beam. Share your creative experiences with us. Our German support team is also available to help you if you have any questions. We look forward to seeing you!

High quality laser device for engraving stones

With the Mr Beam you get a high-quality, reliable and durable laser device with which you can label many stones . For example, it is an ideal supplement for souvenir shops and giveaways of all kinds. Not only inspire your customers with unusual graphics, but also with their implementation. Stone engraving has never been easier than with the Mr Beam II dreamcut [S] laser cutter or Mr Beam II dreamcut [x].

Engrave stones now!

Our Mr Beam laser cutters

[S]
[x]

Known from:

  • The Mr Beam is really super easy to use, even without a lot of technical knowledge .
    It's incredibly fun to work with.

    Natalia Fercho
  • Purchasing Mr Beam got me back into working with wood and is just what I was fortunately missing.

    Dagmar Rohweder
  • The delivery was quick and if you have any questions, you will get an answer within a very short time. We can only recommend Mr Beam and his team :-).

    Michael Mueller
  • I bought my Mr Beam 2 months ago and made a very personal dream of a small business possible. I'm excited!

    Ruta Völker

Frequently asked questions about stone engraving

Which stones can be engraved?

What do I have to consider when lasering stones?

What advantages does our laser cutter have to engrave stones?

How safe is stone engraving with our laser cutter?