markSolid laser marking spray for metal (various sizes)
A strong community where you can find help and exchange ideas!
From the device to the accessories, the consumables and the inspection, you get everything coordinated with us and from a single source !
Made in Germany : You can always rely on quality and service!
markSolid Spray – Highly Durable Markings for Stainless Steel with Your Diode Laser Cutter
The markSolid Spray is the ideal solution for anyone who wants to permanently mark stainless steel with a diode laser cutter or, of course, a CO2 laser. Thanks to innovative technology, an extremely scratch-resistant, chemically resistant, and UV-resistant black enamel layer is created on the metal surface. This high-quality marking stands out from other methods due to its high resolution, intense contrast, and exceptional durability. Important: it is not an engraving, but a material application.
Why markSolid?
✅ Permanent black marking on stainless steel
✅ Extremely economical – a small amount is enough for large markings
✅ High resistance to scratches, chemicals, and UV radiation
✅ Easy application thanks to soft spray system for precise application
✅ Reduced thermal stress for gentle metal marking
How the markSolid process works
By precisely applying the spray to the surface to be marked, a thin but highly durable layer is created. During lasering, the material bonds with the metal, forming a deep black, high-contrast marking that meets the highest demands. Compared to other marking methods, the heat input is significantly reduced, preventing material deformation.
Ideal for:
🔹 Industry & Craft – permanent labeling of components
🔹 Laser Engraving Service Providers – high-resolution markings with perfect contrast
🔹 Makers & Hobbyists – professional results with diode lasers and high-quality personalizations
Whether small components or large-area markings – with markSolid, every stainless steel marking succeeds reliably and professionally.
💡 Tip: Due to its high yield, even a thin layer is sufficient – this saves material and achieves optimal results!
🚀 Order markSolid Spray now and permanently mark stainless steel with diode lasers!
For Mr Beam users, it should be noted that the spray works from the [S] head. Please watch our video before use and read this article carefully.
The spray is of course also suitable for other laser cutters. However, we cannot recommend any specific settings.
Available sizes: trial size 100ml & 300ml as well as a saver pack with 2x300ml.
Safety data sheet for markSolid Spray
Hazard and safety information
Danger! Extremely flammable aerosol.
Pressurized container; may burst if heated.
Causes serious eye irritation.
May cause drowsiness or dizziness.
May cause cancer by inhalation.
Manufacturer details:
Pigmentum GmbH
Schillerstraße 35
90547 Stein
office@marksolid.de
Downloads for your Mr Beam!
Welcome to our download area – here you'll find helpful information, instructions, and files about your Mr Beam's hardware and software. By the way, some of this can also be found directly in the user interface once you've connected to your Mr Beam.
General information about Mr Beam: Data Sheet [x] & [xx]
Hardware Downloads
Laser Cutter Manual German: Download
Laser Head Cleaning Instructions
Quickstart Guide German: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [S]: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [x]: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [xx]: Download
Data Sheet Air Filter: Download
Air Filter System Manual: Download
Air Filter III Manual: Download
Mr Beam Height Extension Manual: Download
Laser Safety: Download
Declaration of Conformity Mr Beam Laser Cutter: Download
Declaration of Conformity Mr Beam Air Filter System: Download
The Declaration of Conformity can also be found in the Operating Manual.
Here you can download our multilingual manuals
Software Downloads:
Please make sure you are always using the latest file!
Current Software Update: Download
IP Tool (USB): Download
Network Reset (USB): Download
WIFI Configuration (USB): Download
Stick to delete design files: Download
Design Backup Stick: Download
Manufacturer of Mr Beam Laser Cutters & Air Filter Systems and operator of the Mr Beam Design Store:
Mr Beam GmbH
Trappentreustr. 23
80339 Munich
Contact: hello@mr-beam.org
Can I return ordered products?
Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation
How much are the shipping costs?
Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.
What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?
The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.
You can find more information about repairs on ourrepair service landing pages.
Here you will find the instructions for packing your Mr Beam for return: Packaging instructions
Item number 920-00045
markSolid Spray – Highly Durable Markings for Stainless Steel with Your Diode Laser Cutter
The markSolid Spray is the ideal solution for anyone who wants to permanently mark stainless steel with a diode laser cutter or, of course, a CO2 laser. Thanks to innovative technology, an extremely scratch-resistant, chemically resistant, and UV-resistant black enamel layer is created on the metal surface. This high-quality marking stands out from other methods due to its high resolution, intense contrast, and exceptional durability. Important: it is not an engraving, but a material application.
Why markSolid?
✅ Permanent black marking on stainless steel
✅ Extremely economical – a small amount is enough for large markings
✅ High resistance to scratches, chemicals, and UV radiation
✅ Easy application thanks to soft spray system for precise application
✅ Reduced thermal stress for gentle metal marking
How the markSolid process works
By precisely applying the spray to the surface to be marked, a thin but highly durable layer is created. During lasering, the material bonds with the metal, forming a deep black, high-contrast marking that meets the highest demands. Compared to other marking methods, the heat input is significantly reduced, preventing material deformation.
Ideal for:
🔹 Industry & Craft – permanent labeling of components
🔹 Laser Engraving Service Providers – high-resolution markings with perfect contrast
🔹 Makers & Hobbyists – professional results with diode lasers and high-quality personalizations
Whether small components or large-area markings – with markSolid, every stainless steel marking succeeds reliably and professionally.
💡 Tip: Due to its high yield, even a thin layer is sufficient – this saves material and achieves optimal results!
🚀 Order markSolid Spray now and permanently mark stainless steel with diode lasers!
For Mr Beam users, it should be noted that the spray works from the [S] head. Please watch our video before use and read this article carefully.
The spray is of course also suitable for other laser cutters. However, we cannot recommend any specific settings.
Available sizes: trial size 100ml & 300ml as well as a saver pack with 2x300ml.
Safety data sheet for markSolid Spray
Hazard and safety information
Danger! Extremely flammable aerosol.
Pressurized container; may burst if heated.
Causes serious eye irritation.
May cause drowsiness or dizziness.
May cause cancer by inhalation.
Manufacturer details:
Pigmentum GmbH
Schillerstraße 35
90547 Stein
office@marksolid.de
Downloads for your Mr Beam!
Welcome to our download area – here you'll find helpful information, instructions, and files about your Mr Beam's hardware and software. By the way, some of this can also be found directly in the user interface once you've connected to your Mr Beam.
General information about Mr Beam: Data Sheet [x] & [xx]
Hardware Downloads
Laser Cutter Manual German: Download
Laser Head Cleaning Instructions
Quickstart Guide German: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [S]: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [x]: Download
Data Sheet Laser Cutter Mr Beam II dreamcut [xx]: Download
Data Sheet Air Filter: Download
Air Filter System Manual: Download
Air Filter III Manual: Download
Mr Beam Height Extension Manual: Download
Laser Safety: Download
Declaration of Conformity Mr Beam Laser Cutter: Download
Declaration of Conformity Mr Beam Air Filter System: Download
The Declaration of Conformity can also be found in the Operating Manual.
Here you can download our multilingual manuals
Software Downloads:
Please make sure you are always using the latest file!
Current Software Update: Download
IP Tool (USB): Download
Network Reset (USB): Download
WIFI Configuration (USB): Download
Stick to delete design files: Download
Design Backup Stick: Download
Manufacturer of Mr Beam Laser Cutters & Air Filter Systems and operator of the Mr Beam Design Store:
Mr Beam GmbH
Trappentreustr. 23
80339 Munich
Contact: hello@mr-beam.org
Can I return ordered products?
Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation
How much are the shipping costs?
Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.
What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?
The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.
You can find more information about repairs on ourrepair service landing pages.
Here you will find the instructions for packing your Mr Beam for return: Packaging instructions