Mr Beam II dreamcut [xx] Laser head with 20W – Maximum power for your projects

The new 20W Mr Beam II dreamcut [xx] laser head is the powerful successor to our [x| head and is aimed at all power users who want to get even more out of their laser cutter. With its concentrated power, it's ideal for cutting wood and acrylic – precise, fast, and reliable.

Why the 20W dreamcut [xx] and for whom is the upgrade worthwhile?

• More power: Thanks to the 20W laser power, you can easily handle thicker materials and more complex designs. It also cuts twice as fast – more output in the same time!

• Optimized for materials such as wood & acrylic: Perfect for makers, creatives and professionals who regularly work with and cut these materials

• Future-proof: With this upgrade, you're well equipped to take your projects to the next level.

Tip: If you just want to engrave faster, the [x] head combined with the Fast A[x]is is perfect. If you want to cut more often at some point, you can always upgrade to the [xx].

Upgrade made easy

To operate the dreamcut [xx] laser head , you need the Fast A[xi|s . For safe and clean work, we also recommend the Mr Beam Air Filter III – to keep your workshop free of smoke and particles. Since the new laser head causes a lot of material abrasion in a very short time, we don't consider the Air Filter II to be economically viable, as the filters fill up extremely quickly (with materials with high abrasion, such as wood).

Note: Due to the high smoke development caused by fast cutting at 100% power, extraction is essential to ensure that the build space is always vacuumed and the laser has the best conditions for cutting.

Software Version

Important: You need version 2.4.3.post2 for your Mr Beam to recognize the new laser head. It's best to update via USB stick.
You'll need a FAT32-formatted USB stick. Download the update file and place it in a folder called mrbeam on the USB stick. Then plug the stick into your Mr Beam, and it will perform the update. Afterward, you should restart the software with a hard reload. If you have any problems, you can contact us at any time via a support ticket .

Your advantage with Mr Beam

• Made in Germany : Quality and reliability you can rely on: Each laser head is produced, measured and intensively tested by hand

• Easy installation : The laser head can be retrofitted quickly and easily - the software recognizes the new laser head and loads the new settings accordingly

• Perfect for frequent users : Those who work regularly and intensively benefit from the high speed and cutting quality

Take your ideas to the next level – with the Mr Beam II dreamcut [xx] laser head with 20W and upgrade your dreamcut!

⚙️ Easy installation as always

1. unpacking

2. Install software update

3. Connecting the laser head

4. Get started!

Note: please clean your Mr Beam and check the filters beforehand!

⚡ Check power supply

You absolutely need a 90W power supply to operate it. The Air Filter II also requires a separate power supply. If you don't already have one, you can order one directly from the shop.

⚠️ Important: The cutting mat is no longer suitable

Due to the increased laser power, the classic cutting mat is no longer suitable for cutting work since the [x] head. Please use the following alternatively:

• Mr Beam Cutting Sti[x] or the Cutting Frame (if you have a Height Extension)

🪵 Make sure that there is always some distance between the material and the base plate to avoid gunpowder marks .

With the new laser head, it's also extremely important that the smoke can escape (it can ignite). So place your wood slightly offset on the sticks or frame and make sure the smoke can be easily extracted.

⚠️ Important note on Rotary mode:

Due to the new size and weight, the rotary cutter's usability with the current sheet metal is limited. Especially for smaller diameters, we recommend using the [x] head. Due to the increased weight, the head has to move more slowly. Therefore, we recommend replacing the laser head when switching the laser to rotary mode.

Manufacturer:
Mr Beam GmbH
Trappentreustraße 23
80339 Munich
📧 hello@mr-beam.org

Downloads for your Mr Beam!

Welcome to our download area - here you will find helpful information, instructions and files relating to the hardware and software of your Mr Beam. You can also find some of this directly in the user interface once you have connected to your Mr Beam.

Hardware Downloads

Instructions Lasercutter German: Download

Laser Head Cleaning Instructions

Quickstart Guide German: Download

Data sheet Lasercutter Mr Beam II dreamcut [S]: Download

Data sheet Lasercutter Mr Beam II dreamcut [x] : Download

Air Filter data sheet: Download

Air Filter System Instructions: Download

Instructions Air Filter III: Download

Instructions for Mr Beam Height Extension: Download

Laser safety: Download

Declaration of conformity Mr Beam Lasercutter: Download

Declaration of conformity Mr Beam Air Filter System: Download

Here here you can download our multilingual instructions

Software Downloads:

Please make sure you always use the most recent file!

Latest software update: Download

IP Tool (USB): Download

Network Reset (USB): Download

WIFI configuration (USB): Download

Stick for deleting the design files: Download

Design Backup Stick: Download

Manufacturer of the Mr Beam Lasercutter & Air Filter Systems and operator of the Mr Beam Design Store:

Mr Beam GmbH
Trappentreustr. 23
80339 Munich

Contact: hello@mr-beam.org

Can I return ordered products?

Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation

How much are the shipping costs?

Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.

What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?

The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.

You can find more information about repairs on ourrepair service landing pages.

Here you will find the instructions for packing your Mr Beam for return: Packaging instructions