Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours
![Load image into Gallery viewer, Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/files/MrBeamAcryl_1024x1024@2x.png?v=1689081500)
![Load image into Gallery viewer, Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/products/Acryl_MrBeam_1024x1024@2x.jpg?v=1689081500)
![Load image into Gallery viewer, Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/products/AcrylMrBeamOrange_eba9b086-f779-4e09-badc-c2bf97c334f8_1024x1024@2x.jpg?v=1689081500)
![Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/files/MrBeamAcryl_{width}x.png?v=1689081500)
![Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/products/Acryl_MrBeam_{width}x.jpg?v=1689081500)
![Mr Beam Acrylic, suitable for [S] and [x], 3 mm, DIN A3, various colours](http://www.mr-beam.org/cdn/shop/products/AcrylMrBeamOrange_eba9b086-f779-4e09-badc-c2bf97c334f8_{width}x.jpg?v=1689081500)
A strong community where you can find help and exchange ideas with others!
From the device to the accessories, the consumables and the inspection, you get everything coordinated and from a single source!
Made in Germany: So you can always rely on the quality and service!
We love acrylic! And we love that we can also provide you with acrylics for the [S] laser head.
Whether loops, lettering, keychains or even cute name tags - there are virtually no limits to your creativity!
The acrylic can of course also be used with other laser cutters. However, we can not provide settings for this.
Product Information:
Acrylic plate, A3, 3mm thick, available in orange and black. We recommend to use additionally our Mr Beam Cutting Sti[x] and if necessary also the Magnet Clips when cutting. The acrylic can bend due to the heat.
Tip: For very filigree motifs, it is also worth making one more pass than specified in the standard settings. It's better to do it a little faster and more often - that way the acrylic won't "melt" back together so quickly. It is also important that the laser head is very well cleaned, and the filters are not full. The material needs the full laser power to be cut well. It is also important that the laser head is focused appropriately.
Please be sure to remove the protective film before use.