Mr Beam Acrylic Bo[x]
At least since the introduction of our pastel-coloured plywood, we know that you love pastel more than anything! Now there's something brand new in the Mr Beam Shop - namely pastel acrylic sheets. And for all those who can't get enough of acrylic, there is now our practical savings package for all [x] head users!
The Mr Beam Acrylic Bo[x]
Whether loops, lettering, key rings or cute name tags - there are almost no limits to creativity!
Important: If you order this box and have a Mr Beam, then it is imperative that you have an [x] laser head. Only he brings the necessary energy to the material, so that you can also cut the panels without any problems.
The acrylic can of course also be used with other laser cutters. However, we cannot provide any settings for this.
Information about the product:
13 acrylic paints for you to try!
white - black - orange - red - dark red - green - yellow and all our pastel colours together in one set! You save almost 25 euros compared to the individual purchase
Acrylic sheets, A3, 3mm thick in different colours. Info for Mr Beam users: Only suitable for use with a Mr Beam II dreamcut [x] device. We also recommend using our Mr Beam Cutting Sti[x] and, if necessary, the magnet clips when cutting. The heat can warp the acrylic.
By the way: With the pastel colours, one side is matt and the other is shiny!
Tip: In the case of very filigree motifs, it is also worth going one more pass than specified in the standard settings. Better a little faster and more often - this way the acrylic can't "melt together" again so quickly. It is also important that the laser head is very well cleaned, and the filters are not full. The material needs the full laser power to be cut through properly. It is also important that the laser head is properly focused.
Please remove the protective film before use.
Cutting settings for the pastel colours in detail:
Spearmint Green 6x 150
Parma Violet 7x 100
Sour Grape 5x 150
Raspberry Sherbet 2x 150
Orange Fizz 2x 150
Lemon candy 3x 150
You can also find all settings in the Mr Beam software. Please carry out a current software update so that you have all the cutting settings.